How plasterers get more of the right work
Many plasterers live on work from builders and word of mouth, and it works until a builder retires or the work dries up. Homeowners are a steadier market, but they choose differently: they cannot judge a finish until it is too late, so they choose on tidiness, reviews and how well you explain things. This guide shows how a plasterer can win that work online.
6 min readUpdated The team at Vantage Point Digital

Contents
- Beyond the builders
- How homeowners choose a plasterer
- Photographing a finish
- Answer the mess question first
- Explain drying, mist coats and what comes next
- Textured coatings and asbestos
- Lime and older properties
- Rendering
- Memberships and qualifications
- Seasonal patterns
- The pages a plastering website needs
- Common mistakes
- A checklist
- Questions people ask
Beyond the builders
Trade work from builders is valuable: regular, local and paid by people who understand the job. But it ties your income to a few relationships. Domestic customers searching for a plasterer are a second source of work, and often better paid for smaller jobs, if they can find you and trust you.
The challenge is that a homeowner cannot see quality in advance. They have probably lived with a bad plastering job before, or heard about one: lumps, cracks, blown patches, dust through the whole house. What they look for online is proof that you are tidy, reliable and good at explaining things.
How homeowners choose a plasterer
Most domestic plastering enquiries fall into a few types:
- Skimming walls or ceilings before decorating, often after removing old wallpaper.
- Ceiling repairs after a leak, or replacing old lath and plaster or cracked boards.
- Covering or removing textured ceilings.
- Re-plastering after damp treatment, rewiring or renovation.
- Rendering external walls.
- Lime plastering in older, solid-walled homes.
- Coving and decorative plasterwork.
Each attracts a different searcher with different worries. Someone with a water-damaged ceiling wants speed and help with insurance. Someone renovating a Victorian terrace wants to know you understand lime. Give each its own page.
Photographing a finish
Plastering is hard to photograph well, and most plasterers' photos undersell their work.
- Light across the wall. A torch or work light held low at one end of the wall, or natural light from a window to the side, shows how flat the surface is. Flat front lighting hides everything, good and bad.
- Before and after, from the same position.
- Wide shots of finished rooms, and close-ups of corners, angles and reveals.
- The setup: dust sheets, masking, protected floors and furniture.
- The end: a swept, clean room ready for the decorator.
A short video of light moving across a freshly skimmed wall is one of the most persuasive things a plasterer can post.
Answer the mess question first
Ask homeowners what worries them about plastering and most will say mess. Make it a feature:
- How you protect floors, furniture, stairs and carpets.
- Whether you remove old plaster and waste, and how.
- How you keep dust down.
- What the room looks like when you leave.
Put this on your home page and every service page, with photos. It is often the deciding factor.
Explain drying, mist coats and what comes next
Customers often do not know that new plaster needs time to dry before it is painted, or that it needs a diluted mist coat first. Explaining this:
- Prevents complaints when paint peels or cracks.
- Shows you care about the outcome, not just your part.
- Gives customers useful information they will remember you for.
A short section on each page, or a dedicated "after we've finished" page, covers drying time, what affects it, how to tell when plaster is ready, and the mist coat. If you work with a decorator you trust, recommend them. See our guide for painters and decorators for the other side of that relationship.
Textured coatings and asbestos
Some older textured decorative coatings on ceilings and walls, often called Artex after one brand, contain asbestos. The Health and Safety Executive's guidance is that these should not be sanded, scraped or drilled without knowing whether asbestos is present. A responsible plasterer either arranges or recommends testing before disturbing an old textured coating, and either skims over it or has it removed by appropriately trained people.
Explaining this on your textured ceilings page shows customers you know what you are doing and will not put their family at risk. Do not frighten people; just state calmly what you do.

Lime and older properties
Homes built with solid walls, typically before the 1920s, often need breathable lime plaster rather than modern gypsum, which can trap moisture. Customers with period homes increasingly know this and search specifically for lime plastering. If you do it, a dedicated page explaining when lime is needed, how it differs, and examples of your work will attract them. If you do not, do not claim to.
Rendering
External rendering is a different market, more seasonal and more visual. Customers compare finishes: traditional sand and cement, monocouche, silicone and acrylic thin coat systems. Explain the options, maintenance, colour choices and guarantees, and show finished houses from the street. Render manufacturers often run approved installer schemes, which may let you offer a manufacturer-backed guarantee; if you are approved, say so.
Memberships and qualifications
There is no licence for plastering, so show what you can:
- NVQ or City & Guilds qualifications in plastering.
- The Federation of Plastering and Drywall Contractors, if you are a member.
- Render manufacturer approvals.
- CSCS card for site work.
- Public liability insurance.
Seasonal patterns
Internal plastering is fairly steady year round, with peaks when people renovate in spring and before Christmas. Rendering is weather-dependent and concentrated in the warmer, drier months, since render should not be applied in frost or heavy rain. Ceiling repairs follow leaks, so they rise in winter.
The pages a plastering website needs
- Home: "Plasterer in [town]", mess-free approach, photos, tap-to-call.
- Skimming and re-plastering.
- Ceilings: repairs, replacement, overboarding, textured ceilings.
- Rendering, if you do it.
- Lime plastering, if you do it.
- Coving and decorative work, if you do it.
- After we've finished: drying times and decorating advice.
- Areas covered.
- About and qualifications.
- Contact, with an option to send photos.
Our trade website checklist covers the structure of each page.
Common mistakes
- Photos with flat lighting that make your best work look like any other.
- Not mentioning tidiness, when it is the customer's main worry.
- One page for everything, so you cannot be found for "lime plastering" or "ceiling repair".
- No guidance on price. A rough per-room range for skimming is easy to give and very useful.
- No reviews from domestic customers. Builders do not leave Google reviews; homeowners do if asked. Our reviews guide explains how.
A checklist
- Photos lit from the side to show the finish
- Protection and clean-up shown and explained
- Separate pages for skimming, ceilings, rendering and lime
- Drying and mist coat advice
- Textured coating and asbestos approach explained
- Qualifications, memberships and insurance shown
- Price guidance per room or per job
- Areas named
- Reviews requested from every domestic customer
To see how a homeowner searching for a plasterer finds you, try our free Business MOT. It runs a real search for your trade and area and checks your profile, reviews and website.
Questions people ask
- How can a plasterer get more domestic work?
- Make your tidiness and protection obvious, show finishes photographed with side lighting, create pages for each service such as skimming, ceilings and rendering, give rough price guidance and ask every homeowner for a review.
- How long should new plaster dry before painting?
- It depends on thickness, temperature and ventilation, and can range from several days for a thin skim to several weeks for thicker work. New plaster should be fully dry and usually needs a diluted mist coat before normal paint.
- Can you plaster over an Artex ceiling?
- Often yes, but older textured coatings can contain asbestos, so they should not be sanded or scraped without knowing. Many plasterers recommend testing first and then skimming over rather than removing.
- Do old houses need lime plaster?
- Many older homes with solid walls benefit from breathable lime plaster, because modern gypsum plaster can trap moisture in walls built to breathe. A plasterer experienced with lime can advise on each case.



